Coriolis Mass Flow
FP-800Coriolis Mass Flow Meter
The FP-800 is a Coriolis mass flow meter that directly measures liquid mass flow and can also provide density and temperature information. Multiple sensor geometries, accuracy classes and temperature versions support demanding process and custody-style measurement applications.
Technical overview
Published configuration data
Values below describe catalog or typical configurations. The confirmed quotation and model code define the supplied specification.
- Flow coverage
- 1.2-2,500,000 kg/h by size
- Accuracy classes
- 0.1 / 0.15 / 0.2 / 0.5
- Temperature versions
- -200 to 350°C
- Output
- Pulse and 4-20 mA
- Communication
- RS485 Modbus / HART
- Protection
- IP65 / IP66 / IP67
Key characteristics
Why engineers consider FP-800
- Direct mass-flow measurement
- Density and temperature measurement
- No moving parts
- High- and low-temperature versions
Typical applications
Where it fits
- 01Chemical processing
- 02High-viscosity liquids
- 03Oil and fuel measurement
- 04Food and process liquids
Selection checklist
Confirm these conditions before ordering.
Sending this information helps CurioSens verify the measurement principle, materials, range and interface.
- 01Process medium and composition
- 02Minimum, normal and maximum flow
- 03Operating pressure and temperature
- 04Pipe or tube size and process connection
- 05Required accuracy and response time
- 06Output, power supply and communication interface
Engineer-reviewed FAQ
Questions about FP-800
Application answers reviewed for compatibility, selection, installation and maintenance.
What key process parameters must be provided when requesting a custom flow meter quote?+
Obtaining an exact flow instrumentation quotation requires a complete profile of your operating conditions. Essential parameters include the fluid name, full-scale flow rate range, working temperature, and line pressure. For liquid systems, fluid viscosity and conductivity determine suitability for gear, electromagnetic, or ultrasonic technology. For gas mass flow systems, gas purity and composition are critical for calibration factors. Sensor materials, such as 316L stainless steel, UPVC, or PEEK, must match chemical compatibility. Standard configurations offer 4-20mA or RS485 Modbus RTU outputs. If process conditions fall outside standard specifications, this must be confirmed for the selected configuration. Please share your medium, flow range, pressure, temperature, viscosity, tube size, process connection, and required output for prompt pricing.
procurement